THIS IS NOT A SUPPORTED BARCODE SCANNER. THE FOLLOWING PROGRAMMING CODES HAVE BEEN PROVIDED FROM THE MANUFACTURER AND WINDWARD SOFTWARE CANNOT GARANTEE THAT THEY WILL WORK WITH THE SCANNER.
Programming the Tera 5100 Barcode Scanner
The following barcodes were clipped from the Tera 5100 Programming Manual.
The complete manual can be downloaded from:
Start by scanning the Enter Programming Mode Barcode.
And finally scan the Exit Programming Mode Barcode.
If you need to wipe the scanner’s programming and reset the scanner to factory Defaults, scan the following barcode.
Created by Steve Wind Oct 2 2023
